AGame 166826, Руководство по сборке

Страница: 27 / 30

Assembly Instructions
Step 35:
Step 34:
From the underside of the trampoline, tie
the remaining elastic straps of the safety
frame pad through the V-Rings.
Page 27 of 30
The trampoline is now fully assembled.
NOTICE: The trampoline should not be
moved. Unnecessary movement of the
trampoline may cause damage to the tram-
poline frame. If moving is required, use at
least 2+ people, keep horizontal, and lift the
trampoline slightly from the leg extension.
Do not hold on to the top rail. Do not lift the
trampoline more than 4 inches off the
ground.
Tie the end of the cord to one of the
V-Ring attachments located on the mat.
Push the cord through a hole at the bottom
of the enclosure mesh and pull tight.
IMPORTANT: Keep the cord tight at all
times.
Insert the cord through the middle of the
next V-ring, then through the enclosure
mesh and down through the next V-ring.
Continue to do until you have used up
nearly all the cord then tie this end around
a V-ring.
Tie another cord to this V-Ring and contin-
ue until all lengths of the cord have been
used or bottom edge of the enclosure is
completely secured
.