AGame 166826, Руководство по сборке

Страница: 24 / 30

Assembly Instructions
Step 27:
You will need the following parts to complete
7 x Top enclosure pole - Part I
7 x Bottom enclosure pole - Part J
You will also need a cross -head screwdriver
(not supplied)
Insert, Part J, the bottom enclosure poles into,
Part I, the top enclosure poles.
Step 26:
Page 24 of 30
This step will require two people.
Lay the frame pad, Part H, out over the
edge of the frame with the ties facing
downwards.
Align the openings in the frame pad with
the T-Connector
B’s on the frame.
Step 25:
Tie the outer elastic straps on the
underside of the frame pad around the
top tubes of the frame.
Tip: Only apply a single knot when
tying the elastic straps to the frame.
The frame pad is now secured.
WARNING: The trampoline MUST NOT
be used during assembly.