20
The entire
visual fi ll
window will
turn blue.
When control solution is applied, the visual fill window on the
test strip turns blue.
Your meter will beep once indicating that you should remove
the tip of the test strip from the control solution sample.
On the meter display, the droplet
symbols appear on the test strip symbol.
[4]
Viewing Control Solution Test Result:
The result will appear on the display and, if
the volume is enabled, your meter will beep
once. The word “control” will also
appear on the display.
Compare the result of your control
solution test to the range printed on
the test strip vial label for the control
solution level (normal or high) that
you used. Your control solution
result should fall within this range.
The control solution test result is
stored in memory.
To deactivate the meter, remove
the used test strip. Dispose of used
materials properly. If your control
solution test results are out of the
range, repeat the test. If the results
Normal: 80-120 mg/dL
High: 220-320 mg/dL
FOR EXAMPLE ONLY.
Refer to your test
strip vial label for
corresponding range.
