CUSTOM GRILLE PANELS AND SPECIFICATIONS
13
For models:
All Refrigerator (AR), All Freezer (AF), Top Freezer (TF), Side-by-Side (SS), and Side-by-Side 3 Door (3D)
Model AR
H
W
18AR Grille Panel
8 9/16”
14 13/16”
24AR Grille Panel
8 9/16”
20 13/16”
30AR Grille Panel
8 9/16”
26 13/16”
36AR Grille Panel
8 9/16”
32 13/16”
Model AF
H
W
18AF Grille Panel
8 9/16”
14 13/16”
24AF Grille Panel
8 9/16”
20 13/16”
30AF Grille Panel
8 9/16”
26 13/16”
36AF Grille Panel
8 9/16”
32 13/16”
Model TF
H
W
18TF Grille Panel
8 9/16”
14 13/16”
24TF Grille Panel
8 9/16”
20 13/16”
30TF Grille Panel
8 9/16”
26 13/16”
36TF Grille Panel
8 9/16”
32 13/16”
Model SS
H
W
36SS Grille Panel
8 9/16”
32 13/16”
42SS Grille Panel
8 9/16”
38 13/16”
48SS Grille Panel
8 9/16”
44 13/16”
54SS Grille Panel
8 9/16”
50 13/16”
60SS Grille Panel
8 9/16”
56 13/16”
66SS Grille Panel
8 9/16”
62 13/16”
72SS Grille Panel
8 9/16”
68 13/16”
Model 3D
H
W
363D Grille Panel
8 9/16”
32 13/16”
Custom Grille Panels
CAUTION
Grille panels MUST NOT exceed 20 lbs. Panels weighing
more than 20 lbs. may cause product damage.
For grille installation refer to page 11, Grille Assembly In
-
stallation, and see separate Instruction Sheet, No. 31395-
000.
• Remove screws and handle.
• Slide custom panel into position in door trim opening.
• Do ALL doors.
• Do NOT replace handle until hinge and gasket adjust
-
ments have been made. See page 12.
• Replace handle and screws and install plastic screw
caps provided.
NOTE:
All center hinged doors CANNOT exceed 1/2 inch in
panel thickness from the door trim face.
Note:
1/2” Min. (Relief)
1/4” Max.
3/8”
Min.
W
H
