INSTALLING THE GRILLE ASSEMBLY
9
GRILLE MOUNTING - STYLE I BRACKET
Instructions for Installing Grille Brackets
1.
Use the two (91180-000) screws to secure each bracket to the cabinet top.
2.
Loosen the screws at the top of the mounting bracket. Leave .13 inches (2-3 screw
threads) sticking through the bracket.
3.
Install the grille by aligning the screws in the top of the bracket with the slots in the grille
top trim.
4.
Grille is installed when bottom of the grille fits behind the cabinet trim across the front.
5.
Pull grille forward about an inch at the top and retighten the screws in the top of the
bracket.
Cabinet Top Trim
Grille Top Trim
Edge of Cabinet
See Note #2.
2.06” from inside of
cabinet top trim to
centerline of holes.
Bottom of grille
shown behind top
trim. See Note #4.
Mounting Brackets
(91180-000) # 8 - 5/8 P.H. Screws
See Note #1.
Drill four (4) holes 7/64” (.109) dia.
3.81”
2.00”
.45” typ. (ref.)
GRILLE MOUNTING - STYLE III SPRING
Instructions for Installing Grille Mounting (STYLE III) Spring
1.
Remove screw A in mounting bracket. Mount L-bracket with screw A.
2.
Hook one end of spring (81050-000) through hole in L-bracket. Holding the facia in position - stretch the
spring and secure the hook end to the facia through a square top hole in the facia.
GRILLE MOUNTING - STYLE II
SCREW
24”, 30” & 36” wide units will use
one (1) spring (81050-000) and one
(1) L-bracket (30483-000) to secure
the facia.
L-Bracket
(30483-000)
Anti-Tip
Bracket
Screw A
42” & 48” wide units will
use two (2) springs (81050-
000) and two (2) L-brackets
(30483-000) to secure the
facia.
Kappet Screw
(into enclosure)
Screw Cap
Module
Fasten top of grille to enclosure
with screw provided. Cover screw
head with snap-on cap.
Spring
(81050-000)
Grille Back
Facia Bracket
Facia