56
ADJUSTING THE LCD DISPLAY
It e m
Fu n c t io n
Op e r a t io n
Ra n g e
Panel saving
Choose to enable the panel saving
functions and thus reduce the risk
of “image persistence” or “ghost-
imaging”.
1
Press the
/
button on the
control panel or the / button on
the remote control to select the
setting.
2
Press the button on the
control panel or the
button
on the remote control to set the
value.
Brightness
ANTI-BURN-
IN
Brightness: Set to
On
and the
image brightness will be reduced
to an appropriate level. The
Brightness setting in the Picture
menu will be unavailable when
selected.
Off
On
Select the time interval for the
display to slightly expand the image
size and shift the position of pixels
in four directions (up, down, left, or
right).
No t e :
• Activating Anti-Burn-in
TM
will
disable H Position, V Position
and Z oom Mode in the Screen
Menu.
Press the
/
button on the
control panel or the /
button
on the remote control to adjust the
value.
Off
Auto
10 to 900
Seconds
RS232-Routing
Select the network control port.
1
Press the
/
button on the
control panel or the / button on
the remote control to select the
setting.
2
Press the button on the
control panel or the
button
on the remote control to set the
value.
RS232
LAN -> RS232
Boot on source
Set the default source at boot up.
Last Input: Input source is the same
as at last boot.
1
Press the
/
button on the
control panel or the / button
on the remote control to select
La s t In p u t
option.
2
Press the button on the
control panel or the
button
on the remote control to set the
value.
CANCEL
SAVE
