8
Crop Sensor Setup
The Crop Sensor Setup screen is where you can adjust how OptRx calculates the nitrogen rate to apply. Here you can also
select the usage of the Application Rate Table. You can access the Sensor Setup screen by:
OR
OR
÷
NOTE!: You must have a Reference Strip
loaded for the Algorithm Settings button
to be active.
Depending on the Sensor Rx that was selected
when making the Reference Strip you will use
one of the three Algorithm Setup menus:
•
Corn Settings
•
North American Wheat Settings
•
Europe Settings
÷
All units represent pounds (kilograms) of nitrogen.
Corn Settings
Minimum Rate
—This input should be reviewed and set for each application.
Algorithm implication: The Minimum Rate is the amount of nitrogen the operator wants applied to the healthiest
areas of a field. Keep in mind, OptRx may apply very low amounts or zero N if crop appears healthy at the time of
application, however the N reserves in the soil may not be adequate to achieve target yield. This ensures some
amount of N is applied in these healthy areas.
Algorithym
Settings
Configuration
Select Your Specific
Configuration
Crop Sensor
Settings
Configuration
Settings
Crop Sensor
Crop Sensor
Sensor
Configuration
Crop sensor technology designed by Holland Scientific, Inc.
Corn
Settings
North America
Wheat Settings
Europe
Settings
Use Application
Rate Table
Serial Number:
Firmware Version:
Hardware Revision:
2006930002
127.127.127.127
Unknown
Corn Settings
