OptRx
3
PN 2006020–ENG Rev. H
Press the OptRx prescription button to engage the OptRx system to apply variable rate N, based on data
received from the sensors. The OptRx button will not be selectable until a Reference Strip is made or Application
Rate Table is in use.
Create Configuration
A wizard will guide you through the process of selecting or creating a configuration with application settings.
The configuration can be started in two places:
OR
Your Operating Configuration will then be viewable when you start a new Field Operation with the Application Wizard.
÷
You can also use the
Manage Equipment
button to create or edit specific vehicles and implements.
Application Rate Table
To use the Application Rate Table, you need to activate it by check marking the "Use Application Rate Table" box in the
Crop Sensor setup. It can be accessed one of two ways:
OR
The Application Rate Table allows a user to
define their desired rates to apply any product to
any crop type, based on the vegetative index.
You can create up to 16 ranges and assign a
desired rate to these ranges. You also have the
ability to select your VI type to NDRE or NDVI. (For
more information about NDRE and NDVI, refer to
the Glossary.) If you select to use the Application
Rate Table you will not make a reference strip.
You will set up the rate table and start applying.
If you don’t select to use the Application Rate
Table you will have to make a reference strip
before you apply. The exact values for these
settings are up to the grower, ideally after
consulting with an agronomist. Ag Leader
Technology does not provide agronomic advice.
÷
NOTE!: When utilizing the Application
Rate Table, a minimum of two sensors are
required in order to actively apply product.
Configuration
Application
Configuration
Select Your Specific
Configuration
Crop Sensor
Use Application
Rate Table
Settings
Configuration
Settings
Crop Sensor
Use Application
Rate Table
Crop Sensor Rate Table
Lower Bound
Upper Bound
Rate
Number of Ranges
VI Type
NDRE
Press on a value in the table to edit.
