1
PN 2006020–ENG Rev. H
OptRx
OptRx uses sensors, usually mounted on the sprayer’s booms, to assess reflected light to determine plant vigor. It assigns
numeric values to the varying levels of vigor to create a Vegetative Index (VI). Using the VI, OptRx calculates nitrogen
application rates, to apply a variable rate on the go. OptRx creates nitrogen rates either by using the N Algorithm or by
using the user defined Application Rate Table. OptRx can also be used for scanning purposes.
μ
Attention: Proper care of sensor will ensure accuracy and dependability.
Sensor is designed with a vent (A) to
prevent moisture from accumulating and
damaging the electronics. Use care when
attaching/using/storing sensor, so that
nothing blocks the vent.
Ensure that the optics (B) are not exposed
to direct water and sunlight for extended
periods of time. Because direct sun (UV
light) can be destructive, sensor should be
oriented so that optics face the ground
(even when not in use). To maximize the life
and performance of sensors, they should be removed from equipment and housed in a protective environment
when not in use.
Load Configuration
Press the Application App from the home screen. This will take you through the steps needed to load a
configuration.
Once a configuration has been completed, the Map View screen appears.
Map View
A.
Menu button
B.
Total Logged Field Area
C.
Ground Speed
D.
AgFiniti Status
E.
Diagnostics
F.
GPS Signal Indicator
G.
Display Legend
H.
Product Control toolbox
I.
Vehicle Icon
J.
Event Summary
K.
Map View
L.
Split screen
M.
AutoSwath
N.
Master Switch Status
O.
OptRx button
P.
Target Rate/Average VI
Q.
Bar Graph
R.
Reference Strip buttons
Legend
NH3
Flow:
Container:
67.5
875
Rate:
N
Reference Strip
Create
View All
OptRx
Target Rate
N
Average VI
