DirectCommand
Installation
Apache AS715/1010/1210 (MY 2009-2010)
Ag Leader Technology
PN: 2005943 Rev. D
December 2013
Page 11 of 13
NOTE: When routing cable, avoid pinch points and leave
enough slack so that cable will not be damaged when the
boom is raised and lowered during operation.
Enclosure for mounting Liquid Control Module
5. Mount the Liquid Control Module PN: 4000394, in the Boom
Enclosure with the hardware provided in the Hardware Kit PN:
2001354-1.
6. Insert the Black Plug on the Implement Plug, PN: 4000495-1 into
the receptacle labeled
AUXILIARY
on the Liquid Control Module.
7. Connect the 2-pin plug on the Hi-Current Power/CAN Bus
Extension Cable into the 2-pin receptacle coming from the Liquid
Control Module.
8. Connect the single end of the CAN Y-Splice from the
DirectCommand Kit into the mating connector on the Hi-Current
Power/CAN Bus Extension Cable.
9. Plug the black 4 pin connector of the CAN Bus Stub – 8 in. into
the gray side of the Y-Splice.
10. Connect the opposite end of the CAN Bus cable into the
receptacle labeled
CAN BUS
on the Liquid Control Module.
11. Plug the CAN Bus Terminator, PN: 4000141 into the black side of
the Y-Splice installed in Step 8.
