
Product description
LAG-14 ER
9
Probe
The probe consists of two metallic electrode rods which are installed
at a specific distance from each other.
The two electrode rods are contained in a housing with a diameter of
34 mm which also holds the probe in the black LAG container. The
probe is equipped with a two-wire signal cable, length 1 m.
Control unit
The control unit SE2 contains the following elements in an impact-
resistant plastic housing: display elements and controls as well as all
electronic components for signal processing and conversion of the
probe signal into a digital output signal.
The output signal is available as a voltage-free relay contact.
a
Green pilot lamp
B
Test button
c
Red alarm lamp
d
Acknowledge
button
e
Without function
Fig. 2: Control unit