AFM GS 100, Руководство пользователя

Страница: 6 / 46

6 Safety
Safety
The GS Heat Shrink Tunnel is easy to install, operate and maintain. Please follow these
safety steps to insure smooth and safe operation:
All operators should study this manual thoroughly before operating the machine.
•
Always follow GMP (Good Manufacturing Practices) when operating this machinery.
•
The machine is heavy. While unpacking and setting up the unit, always take care to
use proper lifting techniques. Avoid over-reaching and leaning over while handling the
machine and accessories. Use more than one person to lift and move the tunnel.
•
Wear safety shoes and work gloves when moving the machine.
•
Beware of uneven spots on the factory floor when moving the unit.
• Make sure the electrical power source is properly wired and grounded. The power
source should comply with all safety regulations and codes applicable to the
installation location.
• Before attempting any service or repair, make sure that the power is turned off and
power cable is disconnected from the power source.
•
Before connecting the air supply, make sure that the pressure gauge is closed and
that the pressure indicator reads zero.
•
The equipment generates heat, so make sure the area is properly ventilated.
• Do not place any body parts or tools into a running machine!
• Turn off and unplug the machine while servicing and performing maintenance
procedures.
CAUTION
TEAM LIFT