AFM ES-200A, Руководство пользователя

Страница: 7 / 42

7 Safety
4510003 Rev B
Safety
When installing, operating, and maintaining the ES-200A Convection Heat Tunnel,
follow these safety practices.
•
All operators should study this User Guide thoroughly before operating the machine.
•
Always follow GMP (Good Manufacturing Practices) when operating this machinery.
•
The machine is heavy. While unpacking and setting up the unit, always take care to
use proper lifting techniques. Avoid overreaching and leaning over while handling
the machine and accessories. Use more than two or more persons to lift and move
the tunnel.
•
Wear safety shoes and work gloves when moving the machine.
•
Beware of uneven spots on the factory floor; the machine could tip over.
•
Make sure the electrical power source is properly wired and grounded. The power
source should comply with all safety regulations and codes applicable to the
installation location.
•
Before attempting any service or repair, make sure that the power is turned off and
power cable is disconnected from the power source.
•
The equipment generates heat, so make sure that the area is properly ventilated.
• Do not place any body parts or tools into a running machine.
• Turn off and unplug the machine while servicing and performing maintenance
procedures.
Warnings
Before operating the machine, inform all personnel of the following warnings:
• Do not tamper with electrical wiring. Use only licensed electricians for
maintenance. Always disconnect electrical power before attempting
maintenance to any electrical or moving parts.
•
To prevent damage to machinery and injury to personnel, do not increase
settings on either electrical or mechanical overload safety devices.
• Keep hands away from moving conveyors and assemblies. Conveyor belts that
have become worn or frayed can be hazardous and should be replaced
promptly.
•
Never operate this or any moving equipment without all covers and guards in
place. The internal mechanism of most packaging machinery contains numerous
pinch, shear, and in-running nip points, many of which are capable of causing
severe injury and permanent disfiguration.
•
To minimize potential for personal injury, always be sure that machine
operators and others working on machinery are properly trained in the correct
usage of the equipment and properly instructed regarding the safety
procedures for operation.