AFi SM10P, Руководство пользователя

Страница: 168 / 277

156 Publication date: Mar., 2012
Revision A1
Parameter description:

Port :
The logical port for the settings contained in the same row. Click on the port number in
order to configure the shapers.

Shapers (Qn) :
Shows "disabled" or actual queue shaper rate - e.g. "800 Mbps".

Shapers (Port) :
Shows "disabled" or actual port shaper rate - e.g. "800 Mbps".

Scheduler Mode :
Controls whether the scheduler mode is "Strict Priority" or "Weighted" on this switch port.

Queue Shaper Enable :
Controls whether the queue shaper is enabled for this queue on this switch port.

Queue Shaper Rate :
Controls the rate for the queue shaper. The default value is
?
. This value is restricted to
?
-
1000000 when the "Unit" is "kbps", and it is restricted to 1-
?
when the "Unit" is "Mbps.

Queue Shaper Unit :
Controls the unit of measure for the queue shaper rate as "kbps" or "Mbps". The default
value is "kbps".

Queue Shaper Excess :
Controls whether the queue is allowed to use excess bandwidth.

Queue Scheduler Weight :
If you select the scheduler
mode with wighted then
the screen will change as
the figure.