AFi SM10P Скачать руководство пользователя страница 139

Страница: 139 / 277

127

Publication date: Mar., 2012

Revision A1

aware devices, for example, switch connect to switch, Trunk link should be used. Hybrid
link is used for more flexible application.

Hybrid : If the tag of tagged frame is as the same as PVID, the tag of the frame will be
removed. The frame become an untagged frame and transmitted.

Any other tagged frame whose tag value is different from PVID are transmitted directly.

Trunk : all tagged frames with any tag value are transmitted.

Access : The tag of any tagged frame will be removed to become an untagged frame.
These untagged frames will be transmitted.



PVID :

Configures the Port VLAN identifier. The allowed values are 1 through 4094. The default
value is 1.

When the port received a untagged frame, the port will give a tag to it based on the value
of PVID, and the frame become tagged frame.

OTE

The port must be a member of the same VLAN as the

Port VLAN ID.



Buttons:

Save – Click to save changes.
Reset- Click to undo any changes made locally and revert to previously saved

values.

Содержание SM10P






















































































































































































































































































Результаты поиска

Содержание SM10P

Отзывы:

Бренды по названию

Популярные бренды

AFi SM10P, Руководство пользователя

Результаты поиска

Содержание SM10P

Отзывы:

Бренды по названию

Популярные бренды