AFi SM10P, Руководство пользователя

Страница: 131 / 277

119
Publication date: Mar., 2012
Revision A1
3- 9 Filtering Data Base
Filtering Data Base Configuration gathers many functions, including MAC Table Information,
Static MAC Learning, which cannot be categorized to some function type.
MAC table
Switching of frames is based upon the DMAC address contained in the frame. The switch
builds up a table that maps MAC addresses to switch ports for knowing which ports the
frames should go to (based upon the DMAC address in the frame). This table contains both
static and dynamic entries. The static entries are configured by the network administrator if
the administrator wants to do a fixed mapping between the DMAC address and switch ports.
The frames also contain a MAC address (SMAC address ), which shows the MAC address of
the equipment sending the frame. The SMAC address is used by the switch to automatically
update the MAC table with these dynamic MAC addresses. Dynamic entries are removed
from the MAC table if no frame with the corresponding SMAC address has been seen after a
configurable age time
3- 9.1 Configuration
The MAC Address Table is configured on this page. Set timeouts for entries in the dynamic
MAC Table and configure the static MAC table here.
Web Interface
To configure MAC Address Table in the web interface:
Aging Configuration
1. Click configuration .
2. Specify the Disable Automatic Aging and Aging Time.
3. Click
Save.
MAC Table Learning
1. Click configuration .
2. Specify the Port Members(Auto,Disable,Secure).
3. Click
Save.
Static MAC Table Configuration
1. Click configuration and Add new Static entry .
2. Specify the VLAN IP and Mac address ,Port Members.
3. Click
Save.
Figure 3- 9.1: The MAC Address Table Configuration