manualshive.com logo in svg

AFi SM10P, Руководство пользователя

Поделиться
Скачать
AFi SM10P Скачать руководство пользователя страница 122

110

Publication date: Mar., 2012

Revision A1

 

A  large network may support multiple VoIP  policies across the entire organization, and 
different policies per application type. LLDP-MED allows multiple policies to be advertised per 
port, each corresponding to a different application type. Different ports on the same Network 
Connectivity Device may advertise different sets of policies, based on the authenticated user 
identity or port configuration. 

 

It should be noted that LLDP-MED is not intended to run on links other than between Network 
Connectivity Devices and Endpoints, and therefore does not need to advertise the multitude of 
network policies that frequently run on an aggregated link interior to the LAN. 

 

 

Delete : 

Check to delete the policy. It will be deleted during the next save. 

 

Policy ID : 

ID for the policy. This is auto generated and shall be used when selecting the polices that 
shall be mapped to the specific ports. 

 

Application Type : 

Intended use of the application types: 

1. Voice - for use by dedicated IP  Telephony handsets and other similar appliances 
supporting interactive voice services. These devices are typically deployed on a separate 
VLAN for ease of deployment and enhanced security by isolation from data applications. 

2. Voice Signalling (conditional) - for use in network topologies that require a different 
policy for the voice signalling than for the voice media. This application type should not be 
advertised if all the same network policies apply as those advertised in the Voice 
application policy. 

3. Guest Voice - support a separate 'limited feature-set' voice service for guest users and 
visitors with their own IP Telephony handsets and other similar appliances supporting 
interactive voice services. 

4.  Guest Voice Signalling  (conditional) - for use in network  topologies  that  require  a 
different policy for the guest voice signalling than for the guest voice media. This 
application type should not be advertised if all the same network policies apply as those 
advertised in the Guest Voice application policy. 

5. Softphone Voice - for use by softphone applications on typical data centric devices, such 
as PCs or laptops. This class of endpoints frequently does not support multiple VLANs, if at 
all, and are typically configured to use an 'untagged' VLAN or a single 'tagged' data specific 
VLAN. When a network policy is defined for use with an 'untagged' VLAN (see Tagged flag 
below), then the L2 priority field is ignored and only the DSCP value has relevance. 

6. Video Conferencing - for use by dedicated Video Conferencing equipment and other 
similar appliances supporting real-time interactive video/audio services. 

7. Streaming Video - for use by broadcast or multicast based video content distribution and 
other similar applications supporting streaming video services that require specific network 
policy treatment. Video applications relying on TCP with buffering would not be an intended 
use of this application type. 

8. Video Signalling (conditional) - for use in network topologies that require a separate 
policy for the video signalling than for the video media. This application type should not be 
advertised if all the same network policies apply as those advertised in the Video 
Conferencing application policy. 

 

Tag : 

Tag indicating whether the specified application type is using a 'tagged' or an 'untagged' 
VLAN. 

Untagged indicates that the device is using an untagged frame format and as such does 
not include a tag header as defined by IEEE 802.1Q-2003. In this case, both the VLAN ID 
and the Layer 2 priority fields are ignored and only the DSCP value has relevance. 

Tagged indicates that the device is using the IEEE 802.1Q tagged frame format, and that 

Содержание SM10P






















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды