s t a ge
s t a ge
s t a ge
17
4
4
Use a drill or screwdriver to install the included
mounting screws at the eyelet marks. Hang the
bracket from the mounting screws.
Reattach the filter cartridges to the bracket by
hand-twisting them in sequential order, with
cartridge 3 sitting directly below the word “flow”
on the bracket. Refer to the numbers on each
cartridge and the diagram on the front of the
bracket to guide you.
1
2
Run cold water for 5 minutes or until the water
runs clear with few, if any, bubbles.
Drink up and enjoy the convenience of clean water
on demand.
STEP 7
PRIME & ENJOY (DO NOT SKIP)
To ensure your system works efficiently and effectively,
you must prime it prior to first use.
18
