Afar NX-2E1, Руководство оператора

Страница: 52 / 75

NetCrossing Gateway NX-2E1/T1 Operator’s Manual
4-18
Example:
>download destination=nxg01_12 method=inline
After issuing the command initiate the file transfer using the terminal facilities.
run-file
filename=filename
Executes the specified file. The file is first copied into RAM and then the program is executed
out of RAM. If the gateway is rebooted or power cycled, the gateway reverts back to the
program defined as the default program. If the memory location is not defined (flash or tmp),
the command assumes the flash directory.
Examples:
>run nxg01_04
set-default-program
filename=filename
Sets the specified file as the default program to be loaded upon reboot or power cycle. Since
the default program must reside in flash memory, the “flash/” prefix is assumed and is not
required for the command.
Examples:
>sdp nxg01_04
4.8 Event Logging Commands
The NetCrossing Gateway keeps track of various significant events in an “event log”. This event log
holds up to 500 events. The first 100 entries in the log are filled sequentially after power up and are
not overwritten. The remaining 400 entries consist of the last 400 events recorded. All events are
time-tagged with system time.
Events are classified in different categories from level 0 (catastrophic error) to 7 (debugging).
clear-log
region= all-events or reboot-reasons
This command clears the contents of the system event log from the specified “region”. After a
code upgrade it is recommended to clear the reboot reasons since the pointer in non-volatile
memory pointing to the reason message may no longer be valid.