Afag PEZ-100, Инструкция по техническому обслуживанию

Страница: 29 / 60

PEZ-52-65-80-100 BA-vers.1.3 gb.15.10.14.doc Seite 29
3.1.4 Warranty
The axis is designed
for 20’000 km / 2 years*
operational performance under the
ambient and Installation conditions defined for this module; see technical data, load
data and the design and the acceleration diagrams.
The toothed belt is a wear part and is excluded from the warranty.
The warranty includes the replacement or the repair of defective parts at Afag
Automation AG.
Carrying out repairs on the linear guide and the gear without previous instruction by
Afag Automation AG voids the warranty. Any additional claims are excluded.
*whichever comes first
3.1.5 Areas of application
The gantry axes of the PEZ series have been specially designed for horizontal
Installation. The motor/gear combination is fitted to the rigid axis part and is thus not
included in the moving mass of the system. This enables high dynamics and
favourable weight distribution for the support axis or substructure. Do not operate the
unit under conditions with increased dirt accumulation as no further protective
measures or covers are available.
The typical areas of application are:

Moving module superstructures over long distances

Use as gantry modules

In combination with for fast and flexible pick&place applications
NOTE
Other applications, particularly the transport of persons and animals
as well as usage as pressing and bending device for cold working of
metals are not allowed. The axis must also not be used in the
chemical and food industry and in potentially explosive areas without
taking additional measures. Please contact our technical department
if such applications are planned.