Decommissioning, disassembly, disposal
Assembly instructions
EN
PEL20 I PEL20-SL I PDL30 I PDL40 I PDL40-HP
06.09.2021
Version 4.0 63–68
10 Decommissioning, disassembly, disposal
The portal axis must be properly dismounted after use and disposed of in an
environmentally friendly manner.
10.1 Safety instructions for decommissioning and disposal
10.2 Decommissioning
If the portal axes are not used for a longer period, they must be properly
commissioned and stored as described in
chapter 4.5.
10.3 Disposal
The portal axis must be disposed of properly at the end of their service life and
the raw materials used must be recycled. Observe the legal regulations and
company requirements.
The portal axis must not be disposed of as a complete unit. Dismantle the portal
axis and separate the various components according to type of material and
dispose of them properly:
Scrap the metallic materials.
Hand over plastic parts for recycling.
Sort the rest of the components by their material properties and dispose of
them accordingly.
WARNING
Risk of injury due to improper decommissioning and disposal!
Improperly carried out activities can result in considerable material damage
and serious injury.
Only use trained specialist personnel to carry out the activities.
Disconnect the media supply before dismounting the module!
Only dismount the portal axis when the control unit is switched off and
secured!
NOTICE
Risk to the environment due to incorrect disposal of the packaging
material of the rotational axis!
Environmental damage can be caused by improper disposal of the portal axis.
Electronic parts, electrical scrap, auxiliary and operating materials must
be disposed of by approved specialist companies.
Information on proper disposal can be obtained from the responsible local
authorities.
