Page 8
16/05/2019
R06.0
The magnet, connected to the base, creates a force which attracts reps. releases the
armature (Anchor bolt) dependent on the oscillation frequency of the power supply.
As the armature (Anchor bolt) is also connected to the vibrating plate, this also makes
the same pulsating movement. The material to be conveyed is therefore raised from
the conveyor line on each oscillation as a result of the angle of inclination of the leaf
springs and carries out small throwing movements in a vertical direction to the leaf
spring level.
On a cycle of the 50Hz alternating current supply, the magnet achieves twice
it’s max-
imum pulling force while this is independent of the direction of current flow. The mag-
net thereby produces an oscillating frequency of 100Hz. This 100Hz oscillation is nec-
essary to achieve a smooth or gentle transport.
With heavy or large work pieces however, it is necessary to use an oscillating fre-
quency of 50Hz. A half wave of the mains supply is thereby blocked.
2.3 Technical Data
Figure 2
