R06.0
16/05/2019
Page 5
1.2 Basic safety information
This operating manual provides the basis for the safe use and operation of the vibrato-
ry feeder. This operating manual and, in particular, the included safety instructions
have to be observed by all individuals working with and on the vibratory hopper. In
addition, all rules and regulations regarding the accident prevention applicable for the
site of operation are to be complied with.
The operating manual must always be kept at the site of operation of the vibratory
hopper.
1.3 Intended use
The vibratory hopper is intended to store component parts of different sizes, forms and
types of material.
The workpieces must meet the following requirements in order to ensure a problem-
free feeding:
-
they must be free of oil, grease and burrs
-
they must not be sticky
-
they must not be statically charged
-
they must not be magnetic (no self-magnetism)
-
they must be free of dirt and not be mixed with foreign parts
-
rubber parts may be powdered with talcum
WARNING
The NVD may not be used:
a) in damply and wet area
b) in temperature lower than 10°C or higher than 45°C
c) in areas where readily flammable media are present
d) in areas where readily explosive media are present
e) in heavy polluted or dust- laden area
f) in aggressive area (e.g. saliferous atmosphere)
