Page 10
16/05/2019
R06.0
3 Assembly instructions
3.1 Transport
WARNING
Improper use of transport means (industrial trucks, cranes, tech-
nical aids, sling gear etc.) may lead to bruises and other injuries.
Required behaviour:
▪
Observe and follow the transport and maintenance instruc-
tions
▪
Proper use of transport means
CAUTION
During transport, the NVD must only be held by the base.
The feeding channel is not to be held.
3.2 Installing the unit
For operation, the NVD must always be mounted on a sufficiently proportioned foun-
dation.
There are 4 threaded holes located on the bottom side of the drive which are used to
connect with the subframe.
(see chapter 2.3 Technical Data)
When installing the NVD, it must be ensured that the base is horizontal or negatively
inclined ~5°, depending on the material to be conveyed.
