Maintenance and Repair
42 – 48
Assembly instructions EN
GE-25-P
Date 02.11.2021
Version 1.0
9.3.2 Further maintenance
Further maintenance is not required, if the ambient conditions listed below are
complied with:
Clean working area
No use of splash water
No abrasive or process dust and vapours
Climate and temperature as specified in the technical data
9.4 Spare parts and repair work
Afag Automation AG offers a reliable repair service. Defective electric grippers
can be sent to Afag for warranty repair within the warranty period.
After expiry of the warranty period, the customer may replace or repair defective
modules or wear parts himself or send them to the Afag repair service.
Please note that Afag does not assume any warranty for electric modules
that have not been replaced or repaired by Afag!
CAUTION
Risk of injury when removing the GE-25-P due to uncontrolled
movements!
When disassembling the electric grippers from a system, there is a danger of
uncontrolled movements.
Disconnect the media supply (electrics, pneumatics) before removing the
modules!
Disassembling should only be carried out by qualified personnel!
Only dismount the electric gripper when the control unit is switched off and
secured!
NOTICE
Risk of injury by using unauthorized spare parts!
The use of unauthorised spare parts can be dangerous to personnel and
cause damage or malfunction to the GE-25-P.
Only use original spare parts approved by Afag.
NOTICE
Material damage due to unauthorised disassembly!
Incorrectly performed work can cause damage to the mechanics and internal
electronics.
Disassembly or opening of the GE-25-P is not permitted.
