55 000 015 – Ed. E
Mix2000 - User Manual
6
This document is the property of AETA and can not be duplicated without authorisation
February 2001
Manuel Mix2000 (E) - Ed. E.doc
3.2. Front panel
The front panel includes the following zones, starting from the left:
•
Input channels;
•
Master section;
•
Monitoring section
3.2.1. Input channels
The following picture shows the elements for channels 3 and 4, as an example.
Figure 3 - Input channels (3 and 4)
Notes:
•
When the fader coupling switch is set in the rightmost position, channel fader #4 sets the gain for
both channels simultaneously, and channel fader #3 is inoperative. Of course, the same holds for
the “1+2” fader coupling switch with (respectively) fader #2 and fader #1.
•
When pushing the SOLO button on a channel, the corresponding input signal is sent to both
monitoring channels, overriding the current monitoring source selection.
•
The coloured text on the bottom reminds the panning of the input, depending whether the mixer is
operated in normal stereo mode (L/R green text) or in M/S mode (M/S red text).
