AES uScope, Начало работы, Страница: 11 / 12

AES uScope Manual
www.AESwave.com Copyright 2011 by Automotive Electronics Services, Inc.
Page 11

Press “OK” to exit the menu
Startup Menu On/Off

Highlight “Startup Menu On/Off” using UP/DOWN

Use LEFT/RIGHT to toggle between On/Off

On = Menu items will show on startup

Off = Menu items will be turned off and value mode will be turned on

Press and hold “OK” to accept changes.

You must now save your current settings as a custom startup. See below .

Press “OK” to exit menu
Set Custom Startup (Set current settings as default)

Highlight “Set Customer Startup” using UP/DOWN

Press and hold “OK”

Message will
appear on the upper right confirming the save “Save ok”

Press “OK” to exit menu
Reset Factory Default

To reset your uScope to factory default settings.

Use UP/DOWN to select “Reset Factory Default”

Press and hold
“OK”

You will see a message flash on the upper right hand corner
Calibrate

Ground level calibration is automatically handled by the firmware.
However, you can change the gain calibration of the scope. Please
reference to your user manual for more information.