40-7705ii-C-IS
Page 3
Rev 1 March 16, 2018
1.0
Overview
This document discusses the initial installation, setup, and configuration of the
AES MultiNet Receivers and its 1st 7170-C IP-Link Transceiver. This document
is to be used along with other provided documentation. This document is setup to
provide an organized process while focusing on sections of other documents that
are needed for this initial installation process.
Many sections in this document will direct you to a section in another document.
Although not a requirement, it is generally a good idea to set up your MultiNet
System and become familiar with its operation before putting it into an active
operational mode. This can be done d by a temporary simple setup followed by
the relocation or connection in the intended central station network or could be
the final installation but not put into active use until ready.
1.1
Product Description
General descriptions of the equipment used in the MultiNet system are in the
“AES 7705ii-C MultiNet Receiver System – User Manual”. Refer to this manual
section to get familiar with the components and general makeup of this system.
