Instruction manual for use and maintenance - EN
Rev.: 0
–
aggiornato al 06/11/2020
| Con riserva di modifiche tecniche e salvo errori |
Pag.
10
di
39
3.6.
Residual risk
The use of the unit involves a residual risk as illustrated below, in spite of all safety measures.
All users of the unit must be aware of the residual risk and follow the instructions to avoid any injury or
damage.
Risk of serious damage to the respiratory system - wear a protective device in class FFP2
or higher.
Skin contact with cutting fumes etc. can cause skin irritation in sensitive individuals.
Wear protective clothing.
Before carrying out any welding job, make sure that the unit is positioned / installed
correctly, that the filters are complete and intact and that the unit is active!
The unit can perform all its functions only when it has been switched on.
By replacing the various filters that make up the filtering section, the skin can come into
contact with the separated powder and the processes carried out can volatilize this
powder.
It is necessary and mandatory to wear a mask and a protective suit.
Burning material sucked in and trapped in one of the filters, can cause smoldering.
Switch off the unit, close the manual damper in the capture hood, and allow the unit
to cool down in a controlled manner.
4.
TRANSPORT AND STORAGE
4.1.
Transport
Danger of death from crushing during unloading and transport.
Improper maneuvers during lifting and transport can cause the pallet with the unit to
overturn and fall.
•
Never stand under suspended loads.
A transpallet or forklift truck are suitable for transporting any pallet with the unit.
The weight of the unit is indicated on the rating plate.
4.2.
Storage
The unit shall be stored in its original packaging at an ambient temperature between -20° C and
+50° C in a dry and clean place.
The packaging must not be damaged by other objects.
For all units, the duration of storage is irrelevant.
WARNING
DANGER
