50
2. Attach 4-40 ball link and threaded rod to throt-
tle servo arm.
3. Cut 4-40 rod and carbon rod to correct length
Slip the carbon rod over the 4-40 threaded
pushrod.
1. A none soldering method of attaching throttle
pushrod is shown in the following steps.
Hardware for this method is
not supplied
.
Gather (2) 4-40 ball links, (1) brass spacer,
4-40 all thread, and carbon tube.
4. Install the throttle pushrod to the engine throttle
arm as shown.
