7
KIT CONTENTS
.60-.90 ProX260
MATERIAL LIST
.60-.90 size ProX260
Fuselage
– covered, nose of fuse fuel-proofed:
pre-drilled holes for the tail wheel assembly:
pre-drilled holes for main landing gear mounting
pre-drilled hole for wing tube
pre-drilled holes for anti-rotation pins of wing
pre-cut slot for the stab mounting
pre-cut slot on top of fuse for fin tab mounting
pre-cut and covered throttle servo mounting holes
(1) for 2 stk and (1) for 4 stk.
pre-cut with covering removed cut outs for the
servos in the tail
Left Wing with Aileron
– covered: Pre-drilled for the
mounting of the control horns Pre-cut hole - Covered - in
bottom of wing for the servo extension.
Aileron is in place with (5) CA hinges not glued
Servo Hatch Cover in place with (2) nylon small
latch hatch
(2) 4-40 blind nuts pre installed at wing tip for in-
stalling the side force generators
Right Wing with Aileron
– covered: Pre-drilled for the
mounting of the control horns Pre-cut hole - Covered – in
bottom of wing for the servo extension.
(1) Aileron is in place with (5) CA hinges not glued
Servo Hatch Cover in place with (2) nylon small
latch hatch
(2) 4-40 blind nuts pre installed at wing tip for in-
stalling the side force generators
(1) 8-32 blind nut pre installed for the wing
mounting
Left and Right Side Force Generators
– covered and
pre-drilled the holes of mounting
