2
52” Aeroworks Extra 260 Freestyle Assembly Manual
Page
Aeroworks Contact Information …………….. 2
Introduction …………………………………… 2
Warranty Information ………………………... 2
Kit Contents …………………………...………. 3
Items Needed To Complete …………………… 3
Tightening and Re-shrinking Covering ……… 4
Checking Glue Joints ….………………………. 5
Aileron Assembly ……………..……………….. 5
Aileron Servo Installation …………………….. 6
Aileron Pushrod Assembly ………………….... 8
Side Force Generator Installation ……………. 9
Stabs/Elevator Assembly……………………… 10
Elevator Servo Installation …………………… 13
Elevator Pushrod Assembly ………………….. 13
Rudder/Tail Wheel Assembly ………...……… 14
Rudder Servo/Pull-Pull Installation …………. 15
Main Landing Gear & Wheel Pant Installation .
… 18
Motor and Speed Control Installation ………. 20
Cowl and Spinner Installation ……………….. 23
Radio and Battery Installation ………………. 24
Decal Installation …………………………...… 25
Checking CG w/ “Micro CG Buddy” ………. 26
Preflight Preparations ….…………………….. 27
Control Throws ………………………………. 28
4903 Nome Street
Denver, CO 80239
Phone: (303) 371-4222
Fax: (303) 371-4320
Website:
www.aero-works.net
E-mail:
Tech Support:
CONTACT INFORMATION
TABLE OF CONTENTS
INTRODUCTION
Thank you for choosing the Aeroworks
52” Extra 260 Freestyle QB-L
.
We put great ef-
fort into making this plane the best model you
will ever build and fly. Aeroworks has provided
you with the highest quality kit and performance
possible. We wish you great success in the as-
sembly and flying of your new Aeroworks 52”
Extra 260 Freestyle ARF-QB-L
Great care has been taken in both the
design and manufacturing of the 52” Extra
260 Freestyle ARF-QB-L to allow for the
strongest and lightest construction possible.
Only the highest quality materials from the
covering, paint, wood and hardware have
been used in the construction of this model.
The 52” Extra 260 Freestyle ARF-
QB-L has been individually hand built, cov-
ered and painted by trained and experienced
craftsmen with over 25 years of manufactur-
ing experience. Using CAD design, laser cut
technology and jig-built
assures accuracy
in all stages of production.
WARRANTY
Aeroworks manufacturing guarantees this kit to
be free from defects in both material and work-
manship at the date of purchase. This warranty
does not cover any component parts damaged by
use or modification. In no case shall Aeroworks
liability exceed the original cost of the pur-
chased kit. Further, Aeroworks reserves the right
to change or modify this warranty without no-
tice.
In that Aeroworks has no control over the final
assembly or materials used for final assembly,
No liability shall be assumed nor accepted for
any damage resulting from the use by the user of
the final user-assembled product. By the act of
using the user-assembled product, the user ac-
cepts all resulting liability. Aeroworks does not
accept any responsibility for structural failure.
Warranty Period
It is important to notify Aeroworks of any
damage or problems with the model within
30 days of receiving your airplane to be cov-
ered under warranty. All returned parts must
be shipped in their original shipping boxes
and insured for full replacement value. If
you wish to return this aircraft for any rea-
son a 15% restock fee will be charged to the
customer. In addition the customer is re-
sponsible for all return shipping cost and all
prior shipping cost will not be refunded.
Parts will be fixed or replaced once the
original item is returned at the owner’s ex-
pense. It is the decision of Aeroworks if the
item is to be replaced or repaired.
Aeroworks cannot insure the skill of the
modeler and can not influence the builder
during the construction or use of this air-
craft, and therefore, will not be accountable
for any property damage, bodily injury or
death caused by this aircraft.
