32
3.
Mount the tail wheel steering tiller using two
wood screws.
4.
Stack the tail wheel leaf spring on the tail
wheel strut. Position the tail wheel and leaf-
spring on the bottom of the fuse over the pre
drilled pilot holes. Place a drop of thick CA
on tail wheel strut mounting screws before
inserting in the pre-drilled mounting holes on
the bottom rear of the fuse.
5.
Mount the tail wheel struts and springs using
three wood screws.
6.
Attach the steering springs on both sides of the
tail wheel to the rudder tiller and tail wheel
tiller. Center the springs between both tillers.
