65
6. Secure outer cabanes with 6-32 x 15mm bolts, flat
washer and lock nut.
Note:
Outer struts have been pre-marked LB (left bot-
tom) and RB (right bottom) for easy reference.
7. Ensure lock nuts are tight and will not come lose
from engine vibration.
8. We recommend using Velcro hook and loop for
restraining the top wing aileron extension to the
inner cabanes. This can be found at your local
hardware, automotive or fabric stores.
5. Gather the left and right cabanes, (8) Mounting
bolts, (8) Lock Nuts, and (8) Washers as shown
below.
9. Glue a small piece of Velcro to the inside of the
rear inner cabane and to the side of the safety
clip.
