40
15. Assemble ball link and threaded coupler to servo
arm as shown below.
16. With the servo arm centered and the throttle arm
of the carburetor at half throttle, measure and
mark the end of the throttle pushrod wire that
will be inserted into the threaded coupler as
shown.
17. Gather the soldering tools as shown below.
Note:
For best results we recommend a high
quality Silver Solder like “Sta-Brite” silver
solder.
18. Solder the threaded coupler to the throttle
pushrod wire.
Note:
Lightly sand end of rod for best bond.
