AeroWorks 31% EDGE 540T ARF, Инструкция по сборке

Страница: 12 / 18

5) Due to shipping and packaging, you may have a fine haze on the beautifully painted cowl. If
you do, using a fine rubbing or polishing compound will eliminate the haze effortlessly. You
can find this product at any automotive store.
STEP K
INSTALLING WHEEL PANTS
1) Make a notch in the wheel pant and lite-ply mounting plate with a Dermal drum sander.
Make the notch deep enough to let the wheel pant slide over the axle to the desired height.
2) Align the wheel pant to the gear and with 1/8” drill bit, drill two equally spaced holes through
gear and wheel pant. Mount wheel pants to gear with 4/40 bolts and blind nuts.
STEP L
CONTROL SURFACCE THROW
1) Elevator High rate 20 degrees up and down
Low rate 12 degrees up and down
3-D rate 40 degrees up and down
2) Rudder High rate 60% deflection
Low rate 30% deflection
3-D rate Full deflection
3) Aileron High rate 24 degrees up 24 degrees down
Low rate 18 degrees up 18 degrees down
3-D rate 35 degrees up 35 degrees down
The throws given are to be considered only a starting point. Adjust the throws to accommodate
your style of flying.
11