![background image](http://html1.mh-extra.com/html/aeroworks/100cc-edge-540-arf-qb/100cc-edge-540-arf-qb_assembly-manual_2863241005.webp)
5
KIT CONTENTS
100cc Edge 540 ARF-QB
BASIC AIRCRAFT PARTS:
Fuselage with pre-installed vertical fin – covered, fire-
wall fuel-proofed, pre-drilled three holes for the tail
wheel assembly::
(4) 8-32 blind nuts installed for main landing gear
(6) 4-40 blind nuts installed for the mounting of
the stab(4),Cowling(2)
(1) Engine box top hatch cover with AW logo in
stalled by (4) T2.6x8mm PWA screws
(1) Engine box bottom hatch cover with AW logo
installed by (4) T2.6x8mm PWA screws
(1) Bottom Canister Hatch installed by (4)4-40
blind nuts, (4)4-40x10mm hex style bolts and (4)
3mm flat washers
(1)Hatch cover for the landing gear installed by
(2) T2.6x14mm PWA screws
Canopy base—painted, with (4) 4-40 blind nuts
installed
(1) Tinted Canopy—glued on the canopy base
and painted, installed on the fuselage by (4) 4-
40x16mm hex style bolts
(4) #6 bonded washers for the mounting of the
canopy
(4) 3mm split lock washers for the mounting of
the canopy
3.5(o.d.) x1000mm Antenna tube installed
(2) 3.5(o.d.) x100mm pull-pull exit tube installed
(2) Elevator servo string installed
Left Wing with Aileron – covered: Pre-drilled for the
mounting of the control horns
8-32 blind nuts installed for the wing mounting.
(2) located pins installed pre-drilled hole for cot-
ter pin
(8) pin point hinges glued
(2) Aileron servo string installed
Right Wing with Aileron – covered:
Pre-drilled for the
mounting of the control horns
(2) 8-32 blind nuts installed for the wing mount-
ing.
(2) located pins glued pre-drilled hole for cotter
pin
(8) pin point hinges installed
(2) Aileron servo string installed