25
6. Gather (2) rudder servos (min 180 in./oz.)
(2) 3” to 3 1/2” Double out put servo arms, (2)
Servo coupler assemblies supplied, (2) AW
Safety Clips, all mounting hardware, and a 11”
Y harness as shown below.
7. Attach the Y harness to aft rudder servo lead
and secure with an Aeroworks Safety Clip. En-
sure the connectors will not come apart from
vibration or light tension.
8. Attach the Y harness to forward rudder servo
lead and secure with an Aeroworks Safety Clip.
Ensure the connectors will not come apart from
vibration or light tension.
10. Pull the Y Harness forward into the receiver
compartment.
