AeroVironment TurboCord, Руководство пользователя

Страница: 21 / 28

17
INSTALLING THE CABLE HANGER
CABLE HANGER MOUNTING INSTRUCTION
1. Choose a location to install the cable hanger.
•
The hanger should be located in practical proximity to both the utility
service and the location of your vehicle’s charge receptacle. Preferably
mounted to a wall stud. Dry wall and masonry wall installations require
the use of appropriate inserts.
2. Measure up approximately 36” from the floor and mark the location.
3. Drill out the preferred mounting holes through the back of the cable hanger
using a
7
/
32
-inch drill bit.
4. Using a Phillips Screwdriver, tighten the screws for the cable hanger.
←
←