AeroVironment TurboCord, Руководство пользователя

Страница: 13 / 28

9
CHARGING YOUR VEHICLE
Your charger is designed for easy charging in two modes – 120 VAC and 240
VAC.
120 VAC MODE
When used WITHOUT the ADAPTER, the charger connects to a 120 V outlet
and charges your vehicle in “Level 1” charging mode. The Level 1, 120 VAC
charge regimen takes longer to charge than the Level 2, 240 VAC mode;
however 120 VAC wall outlets are typically more readily available.
1.
Insert
the CHARGE MODULE into the appropriate 120V wall outlet.
2. The BLUE STATUS Indicator on the CHARGE MODULE should be ON. This
means that the charger is ready to provide power to your vehicle.
3.
Plug
the CHARGE COUPLER into your vehicle’s charging outlet until it
clicks. If inserted properly, the BLUE STATUS Indicator will blink once. Once
latched, the CHARGE COUPLER will not disengage unless the release
button is pressed manually.
4. Automatic charge begins . Power will be delivered in accordance to
vehicle demand. If the vehicle is charging, the BLUE STATUS Indicator will
blink on and off approximately every two seconds. Always verify that the
vehicle charging status indicator agrees.
5. When fully charged , the BLUE STATUS Indicator light illuminates solid
blue. Your vehicle has a “dashboard gauge” which can verify that the
vehicle is fully charged. Refer to the vehicle owner’s manual to find the
gauge location on your dashboard.
6. Disconnect when the charge is complete by pressing the release button
on the CHARGE COUPLER and removing it from the vehicle.