AeroVironment TurboCord, Руководство пользователя

Страница: 17 / 28

13
NOTE
TROUBLESHOOTING
Please refer to this Troubleshooting Guide for possible solutions to common
errors or difficulties with charging your vehicle using your portable charger.
Do not attempt to repair or service the charger yourself.
There are no user serviceable parts inside.
A RED TROUBLE Indicator may be triggered by several sources, including the
charger, the utility service, or the vehicle. See Troubleshooting tips below.
The RED TROUBLE Indicator turns on when the charger detects an error
whether it is connected to your vehicle or not. With the RED TROUBLE Indicator
on, the dual charger will not deliver power to the vehicle. The error must be
corrected before charging begins or resumes.
Problem Possible Cause Solution
BLUE STATUS
Indicator does not
illuminate
No power to unit
1.
Check circuit breaker and
other circuit loads.
2.
Try another wall outlet.
3.
Ensure charger module (and
adapter if operating in 240
VAC mode) is fully inserted
into the wall outlet.
Charger internal
failure Contact AV Customer Support
for assistance.
Vehicle will not
charge
RED TROUBLE
Indicator remains
solid
Charge coupler is
not inserted into
the vehicle
1.
Inspect the charge coupler.
2.
Remove the charge coupler
from the vehicle, then reinsert
it into the vehicle receptacle
until it clicks.
Vehicle is not in a
state to accept a
charge Verify vehicle charge timer is
set to permit charging. Refer to
the vehicle owner’s manual for
charge timer instructions.
Communication
error between
charger and
vehicle Contact AV Customer Support
for assistance.