MT-30
Installation, Operation & Maintenance
06225-03H.doc
8 of 47
AeroVironment, Inc
In addition, references for the current are obtained from the utility waveforms,
thereby maintaining the AC Inverter as a true unity power factor interface
regardless of line harmonics.
The DC and AC Inverter manual interfaces are on the front panel of the MT-30
(see figure 2.2).
Figure 2.2 MT-30 Front Panel Diagram
Each of the front panel controls and indicators are described below.
MAIN POWER
pressed to apply and remove power to the system. The switch
is illuminated when power is applied to the system.
EMERGENCY
pressed to remove all power to the system. The switch has a
OFF
locking mechanism and must be rotated counterclockwise to
repower the system.
NOTE:
The main circuit breaker must be switched off and locked out
by authorized factory personnel; and, either the “Main Power”
or “Emergency Off” switch service must be switched off to
remove power from the system for at least
five minutes
prior
to accessing the interior of the cabinet.
Ready Light
(green) when the system power is on and the system is
functioning normally.
