Aerosoft DA20-100, Руководство пользователя

Страница: 114 / 138

Neither the software nor the documentation may
be used for real aviation and training purposes.
07<19
page
DA20-100 ‘Katana’ 4X Manual DESCRIPTION
The generator warning light (red) illuminates during
Generator failure: no output from the generator.
The only remaining power source is the battery (20 amps.
for 30 minutes)
7.11.6 GENERATOR WARNING LIGHT
GEN
FUEL
GEN
FUEL
As soon as the fuel pressure drops below 1.45 psi (0.1
bar), the fuel pressure switch closes, and the fuel pressure
warning light illuminates.
7.11.7 FUEL PRESSURE INDICATOR
The instruments for temperatures, oil pressure, and fuel quantity are
connected in series with the respective sensors. The electrical resistance
of a sensor changes with the measurable variable, which causes the power
to the instrument and consequently the needle deflection to change. Oil
pressure indicator, cylinder head temperature indicator and fuel pressure
warning light are supplied with power through one circuit breaker. Oil
temperature indicator and fuel quantity indicator are also protected
together by one circuit breaker.
7.11.8 INSTRUMENTS
7.11.9 INTERNAL LIGHTING
ON
OFF
INSTRUMENT
PANEL LIGHT
MAP
LIGHT
The internal lighting of the DA 20/100 KATANA is
provided by a lighting module located aft of the Pilot’s
head and on the center line of the aircraft. Included in
this module are two panel illumination lights and one
map light. The switches for the lights are located on the center console aft of
the Trim control switch. There is a dimming control located on the left side of
the instrument panel for adjusting the intensity of the panel lighting. As well
there is a toggle switch located on the top center of the instrument panel
that controls the intensity of the Wing Flap and Trim annunciator.