Aerosoft DA20-100, Руководство пользователя

Страница: 7 / 138

Neither the software nor the documentation may
be used for real aviation and training purposes.
01<07
page
DA20-100 ‘Katana’ 4X Manual
It is of importance to ensure that there are no hardware signals for the
propeller pitch, mixture or spoilers getting into the Katana system
simulation!
Normally it is sufficent to move propeller and mixture levers to the most
forward position and the spoiler lever to the position the spoilers are
completely retracted. But if the hardware does have spikes in its signals, it
will interfere the systems.
1.3.4 HARDWARE SETTINGS
INTRODUCTION AND DESCRIPTION
NOTE: !
Even removed hardware can lead into trouble because FSX or
FSUIPC may interprete the missing signal as the command to move
the axis to the center position. Before using new or other hardware it
is recommended to delete the functions on this device before
changing to another. If the device is not available anymore, it may be
the only solution to delete the settings in the config files.
If the Katana suffers low engine power, heavy drag or the engine won't even
start or keep running also the aircraft has been maintained, it is possibly
some hardware conflict and worth checking and removing some
assignments in FSX or FSUIPC.
NOTE: !
The propeller lever of the Katana can be assigned via FSUIPC with
the 4X L:LEVER_PROPELLER_PITCH function. It is very important
to ensure, that the same lever is not assigned to another FSX or
FSUIPC setting. It is also possible in the Katanas settings to disable
the propeller governor simulation and to use the hardware for
changing propeller pitch like usual.
Further explanations on the FSUIPC options can be found at the end of this
document.