Aeroqual Series 300, Руководство пользователя

Страница: 26 / 56

25
5.2 Gas Sensor Properties Configuration
To enter the gas sensor configuration menu, Click Monitor ->
Setup (or Ctrl P)
Select the “Gas Sensor” tab:
Figure 3: Gas Sensor Configuration Dialogue Box
The sensor name field will always be in UPPER CASE with a
maximum of 7 letters.
The ppm to mg/m
3
conversion factor can be altered to
accommodate the various sensors that can be connected to the
series 500 Monitor base.
By clicking the Update button, the current settings will be stored
on the sensor head. The View button is used to view the current
settings stored on the sensor head.
5.3 Communications Port Configuration (Serial
Port*)
[* if you do not have a serial port then a USB -to-Serial adaptor is
required – contact Aeroqual for details.]
Check the communication port into which the monitor serial cable
has been plugged. If it is not COM1 (default) the configuration
will need to be changed to COM2 or other user specified port.
Click Monitor -> Com Port (or Ctrl M) (figure 4).
Select COM2 or other user specified port. The other settings
should not be changed. Click OK to confirm the setting.