Aeroneb Solo System, Инструкция по эксплуатации

Страница: 41 / 56

Aeroneb
®
Solo System Instruction Manual 35
Table 3: Aeroneb
®
Pro-X troubleshooting
If this happens: It could mean: Try this:
Medication is left
in the nebulizer
unit after
nebulization cycle.
Nebulizer was
not turned on
or connected to
power.
Ensure that
nebulizer is
connected to
power and turned
on.
Rechargeable
battery is
depleted.
Recharge battery
(see Recharging
the battery ).
A 30 minute cycle
was selected
when connected
to the continuous
feed system.
Run a continuous
cycle.
It may be time
to replace the
nebulizer unit.
See Warranty and
End of Life.
Refer to
Aeroneb
®
Solo
parts list.
Flashing amber
LED
It may mean that it
is time to replace
controller
Contact your
local Aerogen
Product sales
representative
Note: The rechargeable battery in the control module should
only be replaced by Aerogen authorized personnel: contact
your Aeroneb
®
product sales representative.