Aeronaut LUXX, Инструкция по сборке

Страница: 19 / 20

Flying the Luxx
Charge battery, check centre of gravity and double check that all controls work and move in the right direction.
Pick a calm day and a field without obstructions for your first flight. With power at 50 % hand start the model into the wind or have a friend
do it for you. Keep a shallow climb up to altitude and trim for straight and level flight. To land, reduce power and start the descend into the
wind. Carry a little power on the approach and switch off the motor just before touch down.
Have fun with your new model!
Parts list
No. Item Pieces Material Plate Type Dimensions
R-1 left fuselage side 1 light ply 1 laser cut 3 mm
R-1.1 left canopy panel 1 light ply 1 laser cut 3 mm
R-2 right fuselage side 1 light ply 1 laser cut 3 mm
R-2.1 right canopy panel 1 light ply 1 laser cut 3 mm
R-3 rear fuselage bottom 1 light ply 1 laser cut 3 mm
R-4 fuselage top 1 light ply 1 laser cut 3 mm
R-5 former 1 light ply 2 laser cut 3 mm
R-6 former 1 light ply 2 laser cut 3 mm
R-7 former 1 light ply 2 laser cut 3 mm
R-8 former 1 light ply 2 laser cut 3 mm
R-9 former 1 light ply 2 laser cut 3 mm
R-10 motor mount 1 light ply 2 laser cut 3 mm
R-11 motor mount 1 light ply 2 laser cut 3 mm
R-12 half former 1 light ply 2 laser cut 3 mm
R-13 half former 1 light ply 2 laser cut 3 mm
R-14 battery tray 1 light ply 2 laser cut 3 mm
R-15 receiver tray 1 light ply 2 laser cut 3 mm
R-16 servo tray 1 light ply 2 laser cut 3 mm
R-17 auxiliary former 1 light ply 2 laser cut 3 mm
R-18 left canopy support 1 light ply 3 laser cut 3 mm
R-19 right canopy support 1 light ply 3 laser cut 3 mm
R-20 canopy frame 1 light ply 3 laser cut 3 mm
R-21 rear canopy frame 1 light ply 2 laser cut 3 mm
No. Item Pieces Material Plate Type Dimensions
R-22 front canopy frame 1 light ply 3 laser cut 3 mm
R-23 canopy frame reinforcement 2 light ply 3 laser cut 3 mm
R-24 canpy reinforcement 2 light ply 3 laser cut 3 mm
R-25 canopy locator 1 light ply 3 laser cut 3 mm
R-26 mid fuselage bottom 1 light ply 3 laser cut 3 mm
R-27 front fuselage bottom 1 light ply 3 laser cut 3 mm
R-28 canopy sheeting 1 light ply 3 laser cut 3 mm
R-29 tail skid 1 light ply 1 laser cut 3 mm
R-30 left wing support 1 balsa 4 laser cut 3 mm
R-31 right wing support 1 balsa 4 laser cut 3 mm
R-32 canopy triangular stock 2 balsa cut part 12×12×190 mm
R-33 fuselage triangular stock 2 balsa cut part 12×12×280 mm
R-34 front wing dowel doubler 2 birch ply 5 laser cut 1 mm
R-35 rear wing dowel doubler 2 birch ply 5 laser cut 1 mm
R-36 Abdeckung Motorspant 1 birch ply 5 laser cut 1 mm
R-37 Flächendübel 2 beech cut part Ø 5×80 mm
R-38 Bowdenzuginnenrohr Höhen- und Seitenruder 2 ABS hardware 1.000 mm
R-39 Stahldraht 2 metall hardware 0,8×1.000 mm
R-40 Gestängeanschluss 2 metall hardware
R-41 entfällt
R-42 Magnet, Haubenverschluss
1 metall hardware
R-43 Magnet, Haubenverschluss 1 metall hardware
R-44 Befestigungszunge Kabinenhaube 1 light ply 3 laser cut 3 mm
R-45 Aufdoppelung Magnethalter R-20 1 light ply 3 laser cut 3 mm
R-46 Magnethalter Rumpf 1 light ply 3 laser cut 3 mm
R-47 Aufdoppelung Magnethalter R-46 1 light ply 3 laser cut 3 mm
R-48 Ballast 2 lead hardware 30×100 mm
L-1 Seitenruderdämpfungsfläche 1 balsa 4 laser cut 3 mm
L-2 Seitenruder 1 balsa 4 laser cut 3 mm
L-3 Randbogen SR-Dämpfungsfläche 1 balsa 4 laser cut 3 mm
L-4 Randbogen Seitenruder oben 1 balsa 4 laser cut 3 mm
L-5 Randbogen Seitenruder unten 1 balsa 4 laser cut 3 mm
L-6 Höhenruderdämpfungsfläche 1 balsa 4 laser cut 3 mm
L-7 Höhenruder 1 balsa 4 laser cut 3 mm
L-8 Randbogen HR-Dämpfungsfläche 2 balsa 4 laser cut 3 mm
L-9 Ruderhorn 3 birch ply 5 laser cut 1 mm
L-10 Steg SR-Dämpfungsfläche 1 balsa 4 laser cut 3 mm
T-1 Mittelrippe, Tragflächenmittelstück 2 obechi 6 laser cut 1,5 mm
T-2 Rippe, Tragflächenmittelstück 18 obechi 6 laser cut 1,5 mm
T-2A Anschlussrippe Tragflächenmittelstück 2 balsa 7 laser cut 5×25 mm
T-3A Anschlussrippe Tragflächenohr 2 balsa 7 laser cut 5×25 mm
T-3 Rippe, Tragflächenohr 2 obechi 6 laser cut 1,5 mm
T-4 Rippe, Tragflächenohr 2 obechi 6 laser cut 1,5 mm
T-5 Rippe, Tragflächenohr 2 obechi 6 laser cut 1,5 mm
T-6 Rippe, Tragflächenohr 2 obechi 6 laser cut 1,5 mm
T-7 Rippe, Tragflächenohr 2 obechi 6 laser cut 1,5 mm
T-8 Rippe, Tragflächenohr 2 obechi 6 laser cut 1,5 mm
T-9 Holmgurt unten, Tragflächenmittelstück 1 pine cut part 3×8×890 mm
T-10 Holmgurt oben, Tragflächenmittelstück 1 pine cut part 3×3×890 mm
T-11 Nasenleiste, Tragflächenmittelstück 1 obechi cut part 4×4×890 mm
T-12 Beplankung Endleiste, Tragflächenmittelstück 2 obechi 9 laser cut 1 mm
T-13 Beplankung Flächenmitte 4 obechi 8 laser cut 1 mm
T-14 Holmgurt unten, Tragflächenohr 2 pine cut part 3×3×250 mm
T-15 Holmgurt oben, Tragflächenohr 2 pine cut part 3×3×250 mm
T-16 Nasenleiste, Tragflächenohr 2 obechi cut part 4×4×250 mm
T-17 Beplankung Endleiste, Tragflächenohr 4 obechi 8 laser cut 1 mm
T-18 wing tip 2 balsa cut part 12×12×110 mm
S-1 Spar web 1 obechi 11 laser cut 1,5 mm
S-2 Spar web 2 obechi 11 laser cut 1,5 mm
S-3 Spar web 8 obechi 11 laser cut 1,5 mm
wing fasteners 2 rubber band hardware 1×10×80 mm
wing jig 4 Depron 10 laser cut
building board 2 styrofoam cut part 890×230×20 mm