18
17
16
17
16
16
17
12
12
12
13
13
14
14
14
15
15
15
Insert the two stringers 12 in formers and jig
and glue stringers to formers.
Glue in place bow plate 13 together
with stringers 14. Then glue stringers
15 in place.
3
4
Insert stringers 16 + 17 into notches on the underside of
sponsons and glue.
Carefully sand the contact surfaces of keel and formers with a sanding block and glue in
place part 18. Secure and weigh down evenly until glue has dried. Make sure that the front
section of the bottom (light brown) is in good contact with keel and formers while the tabs
of the formers remain in firm contact with the building board underneath the jig, so that the
front section of part 18 is slightly rounded.
5
6