78
79
79
80
81
82
41
41
42
42
37
Use the markings on the side panles as a guide to glue in instrument panel 41. Glue in place cover 42 on side panels 37. Make sure you
protect the hull with cling film before you glue. Glue in place the side cockpit fairings 94. The front edges of parts 94 will need to be adapted
to the hood later on.
20
94
94
94
Glue part 80 to steering wheel 78. Then glue
mahogany rings 79 to either side of steering wheel.
Glue parts 81 to the underside of
the steering wheel, then glue in
steering shaft 82.
21
22
83
84
41
84
83
85
86
86
87
43
44
45
46
47
48
44
49
50
51
52
Glue steering column 83 and
flange 84 to instrument panel 41.
Insert steering shaft with steering wheel into
steering column.
23
24
Glue together parts 85 - 87 to assemble throttle lever, then glue
to left inside panel of cockpit.
25
Glue part 43 to part 44 at an angle of 90°. Glue together parts 45 to 48
to form the nose block of the Airmmarine. Sand to a smooth surface when
glue has dried and cover with Oratex.
Glue together parts 101-103 to form the front handle then glue complete
assembly to nose block.
27
Glue together hood from parts 49 to 52: glue together two parts
50, then glue parts 50, 51 and 52 to base plate 49 at an angle of 90°.
Note:
The rectangular marking on part 49 faces down!
26
101
102
103