AeroGT Labs RN200 mono, Руководство пользователя

Страница: 4 / 26

RN200 Mono Software User Manual
1
1 Product Introduction
1.1 System Overview
The RN200 mmWave OTA (Over-the-Air) Test System is designed to perform transceiver tests
for 5G FR2 wireless devices and mmWave radar. It is compact in size, supports a large quiet
zone, offers multiple functions, and is an all-in-one millimeter wave test solution. The RN200
provides a complete solution that can act both as a "test platform and test system." This is a
general software and a cloud-based service platform for R&D applications. Engineers can verify a
device-under-test’s (DUT) OTA performance and perform signal processing, and algorithm tests
according to various technical requirements.
This system supports many functions: arbitrary vector signal generation (VSG), arbitrary
vector signal analysis (VSA), spectrum analysis, S21 amplitude/phase measurements and signal
quality analysis. It can also be upgraded to perform mmWave radar/module amplitude and
phase calibration and target simulation. The software platform provides a convenient
development method that enables the platform to run user-defined tests.
The RN200’s (Figure 1) all-in-one design makes it easy to install and relocate in a typical
office or laboratory environment.
Figure 1: Exterior View of the RN200
1.2 System Structure
The RN200 system is designed on the concept of “simple & fast.” All RF cables and
mechanical parts of the positioner (turntable) are intentionally installed at the rear and bottom